Quote:
Originally Posted by Dart
are you using Co2?
and yes it could very much be because of the weather. Most GBBR's on green gas are ment to operate at room temp or warmer. You could always make a custom cold weather spring.
I have the same issue but its because I am running co2 and the bolt moves too fast for the catch to engage properly.
|
lol no tomorrow I will use co2 for the first time since I have this problem....
But I do not understand that your bolt moves to fast with co2, I assume you are talking about full auto mode + with the bomber bolt carrier?
Because the stock bolt of the WE Scar has quite a slower rate of fire....
Or you are talking in summer time using co2...
Whatever the cause, I hope the usage of co2 is the solution in this period of time
I'll see first thing tomorrow.
ps: isn't a winter spring stiffer, and thus makes it harder for the bolt to go back. Because that is exactly the problem here: the bolt doesnt go far enough as it should...
Unless you are talking about using a softer spring, but that would give me less power when the bolt returns forward.