Airsoft Canada - View Single Post

Rooster · September 23rd, 2010, 19:47

If you take off the bottom plate and the motor doesn't flloat freely on the spring then your wires are causing problems. It puts stress on the pinion shaft and won't turn properly.

September 23rd, 2010, 19:47	#11
Rooster a.k.a. flamethis Trader rating Join Date: Mar 2010 Location: New Brunswick	If you take off the bottom plate and the motor doesn't flloat freely on the spring then your wires are causing problems. It puts stress on the pinion shaft and won't turn properly. Last edited by Rooster; September 23rd, 2010 at 19:49..