Airsoft Canada - View Single Post - WETTI/AWSS - M4/SCAR/HK416

fumoffu · September 21st, 2010, 01:44

Need some help.

So I ordered RA TECH WE firing pin base+Valve knocker for the Scar and it seem it doesn't work at all. It seem the WE stock hammer is not catching the valve locker.

So far the gun wouldn't shoot with the mag.
All I can tell after install everything back with the ra-tech parts. The knocker would not pull back and only if I push the hammer down further then it will.

Any ideas to fix?

Cheers,
fumoffu

September 21st, 2010, 01:44	#423
fumoffu Trader rating Join Date: Sep 2008 Location: edmonton earth	Need some help. So I ordered RA TECH WE firing pin base+Valve knocker for the Scar and it seem it doesn't work at all. It seem the WE stock hammer is not catching the valve locker. So far the gun wouldn't shoot with the mag. All I can tell after install everything back with the ra-tech parts. The knocker would not pull back and only if I push the hammer down further then it will. Any ideas to fix? Cheers, fumoffu Last edited by fumoffu; September 22nd, 2010 at 00:08..