|
+ recoil spring (the 150% springs are all pretty good)
+ recoil guide rod
+ slide
+ bushing (I hope you get it with the slide...usually do...otherwise getting a good fit is hit and miss)
+ nozzle spring
(other nozzle parts you may or may not get with a nozzle kit)
- tiny little screw that holds the floating valve stop in the nozzle
Rear sight, front sight
- guys usually pull them off the stock slide to put on an aftermarket slide....but if you don't have them to start with.....
- the front sights are not too hard to find...most guys who swap over to fiber optic have spare originals
- the factory rear sight is tough to find...but there might be aftermarket ones available now
- 4.3 sights will not fit the cutouts for a 5.1 slide
|