Airsoft Canada - View Single Post

Qlong · September 10th, 2010, 21:21

I just brazed on a thin sheet of steel, about 0.75ish millimeters. It was shaped into an "L" and brazed at the lock. It has been locking 100% after 10+ mags. The extra bit of material helps as more surface area of the lock contacts the bolt.

EDIT: I also have the shims on the lower.

September 10th, 2010, 21:21	#6
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	I just brazed on a thin sheet of steel, about 0.75ish millimeters. It was shaped into an "L" and brazed at the lock. It has been locking 100% after 10+ mags. The extra bit of material helps as more surface area of the lock contacts the bolt. EDIT: I also have the shims on the lower. __________________ Weee! Last edited by Qlong; September 10th, 2010 at 21:24..