Quote:
Originally Posted by Tomolok
So I bought a used VSR10 with a stock barrel/hopup setup, for whatever reason there was no backspin on my BBs.
I managed to get a Laylax VSR-10 hopup chamber which requires an AEG barrel which I had lying around (509mm Madbull 6.03mm), everything installed with PDI barrel spacers, but the BB's are still arcing DOWN whether the hopup lever is at zero or at max, what could the problem be?
Note: The gun has been chronied at 370fps with BB Bastard 0.25s so it's not a cylinder issue.
PDI Vtrigger installed
Laylax orange zero piston with PDI 200 spring and Laylax Bearing Spring Guide
Doctors please help me out!!
|
Am I correct with that understanding? If so, above post covers it. If arcing up, whole different ballgame.