Quote:
Originally Posted by tte404
no there's no o-ring on the fill valve.
|
umm yah there is... there is a small one on the inside and a larger one on the outside. With these I find that I need to soak my fill valve the night before or they piss gas. *soak on oil* also fill in short bursts or the valve will usually end up sticking. If its pissing gas while filling I normally rotate the bottom or the nade and that tends to great a better seal.
In short
yes Oring
Yes leaky when filling
PS I would snap you a pic but it appears that my fill valve is freaking stuck... ironicly I bet its the oring lol
PPS got the valve out. I apologize for the blurry pic but the oring at the tip of the tool sits around the fill valve.