Airsoft Canada - View Single Post - VSR-10 Hopup Problem

Tomolok · July 4th, 2010, 13:47

So I bought a used VSR10 with a stock barrel/hopup setup, for whatever reason there was no backspin on my BBs.

I managed to get a Laylax VSR-10 hopup chamber which requires an AEG barrel which I had lying around (509mm Madbull 6.03mm), everything installed with PDI barrel spacers, but the BB's are still arching whether the hopup lever is at zero or at max, what could the problem be?

Note: The gun has been chronied at 370fps with BB Bastard 0.25s so it's not a cylinder issue.
PDI Vtrigger installed
Laylax orange zero piston with PDI 200 spring and Laylax Bearing Spring Guide

Doctors please help me out!!

July 4th, 2010, 13:47	#1
Tomolok Trader rating Join Date: Oct 2002 Location: Richmond Hill	VSR-10 Hopup Problem So I bought a used VSR10 with a stock barrel/hopup setup, for whatever reason there was no backspin on my BBs. I managed to get a Laylax VSR-10 hopup chamber which requires an AEG barrel which I had lying around (509mm Madbull 6.03mm), everything installed with PDI barrel spacers, but the BB's are still arching whether the hopup lever is at zero or at max, what could the problem be? Note: The gun has been chronied at 370fps with BB Bastard 0.25s so it's not a cylinder issue. PDI Vtrigger installed Laylax orange zero piston with PDI 200 spring and Laylax Bearing Spring Guide Doctors please help me out!! __________________