|
With silencers, take an old AEG spring, stretch it to the proper length and twist it into the silencer to hold all the foam out of the way.
To make things quieter;
Bearing bushings
Helical Gears
Perfect shim job
Proper viscosity greases on the gears, cylinder and mechbox
Polished interior mechbox (friction makes noise)
Light weight piston (TM is good)
ARS Sorbothane piston head
ARS Sorbothane cylinder head
TM EG700 with proper tuned motor height
Trigger Master MKIII with Active Breaking and Soft Start
High-er voltage battery to reduce motor spin time
Silencer /w fibrous foam
Depending on the gun you may be able to add extra material to the outside of the mechbox but still inside the gun, I'd suggest open cell foam, cotton or something similar to that.
|