|
Famas reassembly
OK this is driving me nuts. I hae been at it for an hour have not made any head way. I took apart my famas to change the hop up bucking. Now on the reassembly I can't figure out how to get the cocking lever to work properly. The spring slides all the way back into the reciever right by the hop up unit giving the cocking lever about 2 CM of recoil back. Any idea wtf I am missing? There are two screw holes on either side but I can't put a screw through as the barrel is in the way.
If you need pics lemme know I can get them, This is the only thing thats stopping me from putting this stupid thing back together, this and the fact that you move one thing and six other fucking things fly out and fall on the ground... seriously...
|