|
Installing a new stock is a 5 minute job requiring 2 bolts to be removed. You'd really have to be totally inept to screw that up.
- Remove the existing sliding stock by pulling the adjustment paddle (whatever it's called) down and sliding it off.
- Remove the plug off the end of the stock tube. Usually requires an allen key.
- use a long star screwdriver and go down the stock tube and unscrew the main screw holding it in place.
- reverse the process with a new stock tube and stock
Although the G&P stock I recommended doesn't have the plug at the end, because it's designed to have the wiring run through it for the battery. So reassembly is even easier if you're not rewiring the gun to the rear.
-
__________________
|