Quote:
Originally Posted by Slono
And the glitches.... ah the painful glitches!
My gun is plagued with many, and I blame it totally on myself for installing the kit with no airsoft experience. As we speak I'm trying to figure out why my gun shoots at inconsistent veloticites. Out of 10 shots, there'd be about 1-4 that are weak. You can feel and hear the difference as normally the shot goes "boom" when its a good shoot, but these ones give a wussy "poof". Sometimes it even seems to fire in patterns (eg. Clean hard shot, soft shot, clean hard shot, soft shot). Is this a mag high flow valve installation problem or a hammer/trigger problem? Maybe an air seal problem? When I install the 150% hammer spring my shots get weird more frequently than with the normal hammer spring.
|
There are a lot of issues that can cause this... such as:
- The height of the flow valve strike face being too high
- Valve Knocker being too long
- Hammer spring too strong
- Too much grease on the valve knocker
- Poor seal at piston head/nozzle/mag/cylinder bulb/hop up rubber
- Cylinder bulb spring too strong
- Barrel chamber locking against slide (chronograph can confirm this with consistent velocity at weak "feeling" shot)
The list can go on. I'd see if I could've helped you diagnose and fix it the other day, but you know why I couldn't.