Quote:
Originally Posted by Slono
I bent the furthest right prong farther forward and the most left one out more to be sure it wasn't the leaf spring, and it wasn't. Instead of I found that the sear disconnector, when pushed down far enough to mimic the slide running over it during the blow back action, doesn't come back up. I have to depress the hammer a couple more before it seems to pop back (up). Would this be the smaller pin next to the slide catch that's doing something weird to the disconnector? Or the disconnector just too big to fit into the tight space and needs room to giggle around?
|
I noticed this exact same problem with an MEU install I did with the Nova MEU conversion kit.
I solved this by lightly filing a small ramp in to the back of the sear to allow a bit more clearance for the sear disconnector to slide behind it. It seems to have a bit of difficulty doing so. The Marui M1911A1 never seemed to have this problem with the Nova kits. Seems like only the MEU does.