|
*facepalm* its called a Hop up nub. The bucking is the sleeve.
And the way you get it in is by removing the inner barrel and bucking from the chamber. Then using a small flathead, you slide it into the "hole" inside the hopup chamber. Once its seated properly, Replace the bucking onto the inner barrel and slide the whole assembly in.
__________________
Certified Sniper Clinic Instructor and Counter Sniper
Sentinel Arms Customs - Specializing In Unique, One of a kind guns
Last edited by DarkAngel; January 10th, 2010 at 20:41..
|