[Slono]

I got the trigger to work. According to my mom, I got my dad's genes because he can't rest until he gets everything working. He was with me again troubleshooting the whole gun. We ended up stripping it bare and fixing the valve knocker spring because it was slightly bent, causing the sear to move on an angle making the sear disconnector rub so tightly against the frame that there was no bounce. It would get stuck.

So we bent the valve knocker spring a little and ..NICE. =)

Actually it didn't work and what we ended up finding is that the Nova Warrior receiver is narrower than the stock receiver. That means that the gears inside had not enough room to move. Everything was jammed up in there. So I'm going to sand the sear disconnector.

Edit: Thanks for all your help guys. Still looking into it as sanding the sear disconnector only caused the ambi-safety to wobble when the hammer has not been cocked.