Quote:
Originally Posted by Kos-Mos
Double check for a crack in the hop-up body.
also, if your mechbox do not have a hole to install the cross-pin (if you have the black lower mechbox) it is needed when using the older metal bodies.
You can simply make the hole, but make sure you are certain where to make it.
|
Well that is news to me. I got the mechbox pin with the body and realized I couldn't make use of it (I do have the black lower mechbox). Thanks for the info, I'm guessing the issue is the mechbox is sitting too loosely in the body? Although the upper mechbox is extremely firm in the body and serves to hold the lower in place.