Airsoft Canada - View Single Post - will a mako charging handle fit on a ksc glock

MikeMcNair · September 23rd, 2009, 09:14

to the OP, thanks for the kind words, i love the clipdraw!! the KSC read plate does indeed easily replace with the RS version, so you will be fine with the install of the cocking handle.

in fact, the clipdraw comes with a plate as well, which fits right in my KSC G26c. on the TM, the rear plate is infact not a plate at all, but rather part of the blowback unit, so i had to drill the pilkot holes for the screws to be able to mount it. took me 5 minutes, not a big deal at all.

September 23rd, 2009, 09:14	#17
MikeMcNair Trader rating Join Date: May 2009 Location: PA	to the OP, thanks for the kind words, i love the clipdraw!! the KSC read plate does indeed easily replace with the RS version, so you will be fine with the install of the cocking handle. in fact, the clipdraw comes with a plate as well, which fits right in my KSC G26c. on the TM, the rear plate is infact not a plate at all, but rather part of the blowback unit, so i had to drill the pilkot holes for the screws to be able to mount it. took me 5 minutes, not a big deal at all.