Quote:
Originally Posted by yuhaoyang
........
when you install new bushings you need to re-position the washers on the top and bottom of your gears to achieve ideal spacing.
|
Is there a video I could watch?.... This is seems more difficult than it sounds....
Quote:
Originally Posted by ybrik
reshiming is putting shims in between your gears (resting on bushings at both ends). Your gears should try to move freely without "play" at either sides. In this way, your gears would only crank the resistance of the spring when installed. Try to search for shimming guides. Check your battery also.
|
There are slims in between the bush and gear, I made sure 100%... Though I think I left one out by accident.. But one slim wouldn't cause my gear box to explode... would it?...
Now that I puzzled the top back onto my gun, the sound from the bottom receiver seems to be less nosy... Maybe it's just me over thinking things...