Airsoft Canada - View Single Post - removing bushing, so I could put new ones in!..

ybrik · September 22nd, 2009, 23:23

reshiming is putting shims in between your gears (resting on bushings at both ends). Your gears should try to move freely without "play" at either sides. In this way, your gears would only crank the resistance of the spring when installed. Try to search for shimming guides. Check your battery also.

September 22nd, 2009, 23:23	#10
ybrik Trader rating Join Date: Jun 2007 Location: Ontario, Canada	reshiming is putting shims in between your gears (resting on bushings at both ends). Your gears should try to move freely without "play" at either sides. In this way, your gears would only crank the resistance of the spring when installed. Try to search for shimming guides. Check your battery also. __________________ 5.56x45mm + m27 = M249(SAW)