Quote:
Originally Posted by theguy
Do you mean the front end it too short?
If thats the case, buy a M4 and install an M16 length inner hidden under a silencer
|
That will also require installing a new non-ported cylinder.
If it's simplicity you want, get the M16 and get a G&P crane stock + 9.6V battery from airsoftparts.ca. Will take you all of 20 minutes to install (at most) and will be exactly what you want. The only mod you MAY have to do (not sure what the tube is like on a G&G) it to cut the stock tube on the body down a bit to fit the stock tube.