Airsoft Canada - View Single Post - M1911A -taking the inner barrel out.. replace

ILLusion · September 4th, 2009, 01:39

Just jam a small flat head screwdriver in between the shoulder of the chamber and the hop up chamber, give it a small twist to separate the two parts as you push the inner barrel out. It take 0.3 seconds and very little effort. It should require little to no strength to do. If you feel like you're cranking it, you're doing something wrong and may break it.

September 4th, 2009, 01:39	#5
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	Just jam a small flat head screwdriver in between the shoulder of the chamber and the hop up chamber, give it a small twist to separate the two parts as you push the inner barrel out. It take 0.3 seconds and very little effort. It should require little to no strength to do. If you feel like you're cranking it, you're doing something wrong and may break it. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed