Airsoft Canada - View Single Post

delta76 · July 23rd, 2009, 19:07

I've opened up the mechbox and the trigger connectors are fairly clean no build-up of any sort. Like I said the motor cycles fine and there are no circuit interruptions when the motor is outside of the mechbox, could this actually be a motor issue?

UPDATE:

So based on not having any circuit problems while disassembled, I re-assembled the gun and fired 20 consecutive shots on semi-auto then the trigger locked, I turned it to auto and pulled the trigger no response, back to semi-auto and the trigger was still locked as if on safe. I guess I've broken my selector plate but I can't figure out where.

July 23rd, 2009, 19:07	#6
delta76 Trader rating Join Date: Dec 2008 Location: Toronto	I've opened up the mechbox and the trigger connectors are fairly clean no build-up of any sort. Like I said the motor cycles fine and there are no circuit interruptions when the motor is outside of the mechbox, could this actually be a motor issue? UPDATE: So based on not having any circuit problems while disassembled, I re-assembled the gun and fired 20 consecutive shots on semi-auto then the trigger locked, I turned it to auto and pulled the trigger no response, back to semi-auto and the trigger was still locked as if on safe. I guess I've broken my selector plate but I can't figure out where. Last edited by delta76; July 23rd, 2009 at 20:39..