KWA USP Match magazine well removal
 

Just wondering if any one out there has successfully removed the KWA USP (or KP45 or KP8 or whatever the proper name for it is) Match's jet funnel/flared magazine well? I would assume that it does come off somehow, and is likely attached to the mainspring housing, but I want to find out for sure before I start taking it apart, and consequently "misplacing" springs and the like. Thanks in advance for any input you might have.

No ideas? All right. I won't find out, instead I'll just suck it up and stick with a KWA KP45 full size.

You just unscrew the bottom screw....nothing else.