Handguard For G36 full size
 

hi

I'm looking for a full size metal handguard for CA G36 like this

http://airsoftglobal.com/product_inf...oducts_id=6336

my question is this full size or a shorter version I have found a CA one

http://airsoftglobal.com/product_inf...oducts_id=4061

but again I cant tell if the K version is shorter then a normal G36 front end that it comes with

Also other then buying this to get a metal bipod, all I have found is a high grade nylon folding bipod for G36 yes a RS is only $200 US but would rather put that towards internals later on

http://www.redwolfairsoft.com/redwol...l?prodID=12643

and does anyone know if a G36 bipod will fit on any of those metal handguards shown?

hope you can make out what I'm after :p

thanks

Is this what you need?

http://capitalairsoft.ca/store/index...roducts_id=643

Jeff

yes thats what I'm after but full size

the same size as a G36 front end

the G36c is to small and a G36k I cant tell if its the same as a normal G36 front end or smaller

Ah, I can also order in for G36K, but they are about $85 I believe. PM if you'd like to order.

Jeff

G36K is shorter then the full length G36. By comparison, the G36 is more like an M16 were the K is closer to an M4, C should be the equal to the M4 CQB.

I haven't found a G36 RIS or such, only for the C and K models however I bought and installed this handguard for my CA36 and installed rails.

if you are just doing this to mount a bipod, i have a G&P (or Star, i hafta check) G36 forgrip with attached bipod legs for an Mg36 look. PM me if you are insterested.