UTG L96 Shadow Ops sniper
 

So I bought my gun and everything and I was all happy to get it, it was the gun I originally wanted but I ended up getting a different gun as my first one. So anyways, I get it out the package and assemble it and such and it turns out the outer barrel is loose. I figure that it cant do anything bad to the gun but now when im pulling back the bolt to load another BB into the chamber, sometimes the outer barrel is off and the BBs either get stuck inside or dont even load. Is there any way i can tighten the barrel so it doesnt do this?

If it's anything like the TSD L96, there should be a very small hex screw under the receiver. It's for fixing the outer barrel to the receiver. Just tighten it if it's there.

http://actualairsoft.com/wp/wp-conte...ndreceiver.jpg

its definitely there, but it doesnt look like a screw, but that just might be me, I've never seen one that small before. I'll try it out though, thanks =D

I had some trouble finding one that small as well but I found a screwdriver that fit eventually. It's a 1.5mm on mine...don't know if it's different on the UTG but I'll bet it's the same.