MP5 magazine help
 

hello, so i got my gun, and i got a CYMA 049J g&g clone..and i was going to get some mags for it..the mags i were going to get,. the guy told me wouldnt fit in my gun because thier tm clone mags..so on airsoft parts.com i found these king arms 100r mags and im just wondering if they would fit

the page of them is here...http://www.airsoftparts.ca/store2/in...oducts_id=1009

these are also plastic, so would it be no good? and should i just stick with these...
http://www.airsoftparts.ca/store2/in...oducts_id=1422

those are metal, but their also g&p mags so would those fit?

thanks a lot :)

sooo....

Either should work fine. Cyma is another clone of TM, so any gun that can use TM mags can use those.

Having said that, there are usually fittment issues with clones (usually too loose, occassionally too tight) and that causes related feeding issues. These issues will vary from gun to gun, even the same model by the same manufacturer. The mags you posted are designed to work with your gun (actually the other way around in a way), whether they do or not reliably, you'll have to try and find out for yourself.

Basiaclly what Darklen said.

Its a clone of a clone... kinda.

They should work, but be ready to file some chunks of the mags if you have to

If loose, electrical tape or whatever will work to make it fit nicer. If tight then get the file out and start grinding it down.

Agree if tight, slowly. You can always take more off, can't put more on.

If loose, self adhesive loop Velcro stuck in the magwell works wonders.

thanks