g&g stock
 

Hi all I just got my g&g m4a1 and was wondering, in my instruction manuel it does not say anywhere how to remove the stock. any one know how?

which g&g rifle do you have?

fullstock or collapsible stock?

Ask Miguel is Manuel doesn't know....

If it's a full stock remove the butt plate and undo the screw that holds it to the receiver.

If it's a collapsile stock...pull down (straight down as far as it'll go) on the release lever and slide the stock right off the end of the stock pipe. Then undo the little cap at the end. Then undo the screw that holds the stock pipe to the receiver.

I have the gr 16 wiyh collapsible stock

I have to same one G&G m4a1 blowback with the collapsable stock. Pull the stock lever down insted of pinching it and pull it out. Theres a screw holding the the cap onto the stock tube. Inside is a long screw that holds the tube to the receiver. Hope that helps

Thank you very much!