Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   Is leaving your battery in ok? (https://airsoftcanada.com/showthread.php?t=77529)

incrediboy729 February 26th, 2009 19:41

Is leaving your battery in ok?
 
Hey all Brett here again.
So, i've heard that leaving your battery in your AEG when not in use can kill your battery and/or cause damage. Is this a myth like gear timing? I've left my battery in multiple times overnight with no damage to gun/battery whatsoever and little to no drainage.
Thoughts?
Thanks.
-Brett

EDIT Whoa snap 300th post!

coach February 26th, 2009 19:43

no problems. I can only see issues for extended periods of time, just like any battery, it can possibly leak. Other than that you will be okay to leave it in. I've left mine in for about a month or two but then always recharge before a game. Keep it in safe and all is good.

Shirley February 26th, 2009 19:44

There's no damage. You will just loose power in it like always..
Same shit applies to phones and laptops. Why not leave it in when not using?

To be on the safe side, you should always disconnect your battery. :p

mcguyver February 26th, 2009 19:47

Never leave a battery connected in a PTW. It can cost you a battery.

There are a few guns that do have gear timing, but 99% of them have no timing whatsoever. And some of those the timing is not even adjustable, so in a sense it doesn't really exist.

incrediboy729 February 26th, 2009 19:49

Thanks guys for the super quick responses!

Quote:

To be on the safe side, you should always disconnect your battery.
"Safe" as in so someone doesn't pick it up and shoot it or "safe" as in like battery chemicals?
I don't really care if my gun has a battery and is capable of firing, nobody touches my gun that isn't 18+ (because that's all who's ever around). Plus it's always on safe anyways........and out of reach of small children less they teleport themselves into my room :).

Quote:

Never leave a battery connected in a PTW. It can cost you a battery.
HAHAHAHAHAHA!!!!! I wish that rule applied to me!! ;) But thanks for the input......I have a CA :(

kalnaren February 26th, 2009 20:03

From a proper handling point of view, the battery should always be disconnected. That's just good practice, like ensuring your gun is empty of rounds -not simply just mag out- before putting it away.

Kuro_Neko February 26th, 2009 20:04

Yeah. Leaving it in the gun is fine, I leave one in my mp5k just cause it's a pain to get the thing in and out. But as Hitman stated, it'd be best to disconnect the battery leads just to save your battery. It'll help prevent misfires too if you forget the battery is still in there.

Kuro_Neko

kuchervano February 26th, 2009 21:46

If you leave a battery connected to regular gun it is just like having it disconnected, there circuit is open and no current flows through. Now if its PTW from Systema or simply a gun with MOSFET trigger installed, then it will get drained overtime. Damage to the battery is debatable, as they are intended to be charged and discharged.
Good times

Shirley February 26th, 2009 21:48

Lipo discharged fully is a no no.

mcguyver February 26th, 2009 21:49

A local fellow left his 12v battery connected in his PTW for well over a month. That battery has never been able to hold a charge since, and it took 2 days of careful cycling to get it to hold any charge at all.

So, yes, leaving a battery connected to a load for a long period of time, and letting the cell voltage drop basically to zero, and holding it there, is not good. This was a NiCad battery, btw.

Styrak February 26th, 2009 21:52

Quote:

Originally Posted by mcguyver (Post 928477)
A local fellow left his 12v battery connected in his PTW for well over a month. That battery has never been able to hold a charge since, and it took 2 days of careful cycling to get it to hold any charge at all.

So, yes, leaving a battery connected to a load for a long period of time, and letting the cell voltage drop basically to zero, and holding it there, is not good. This was a NiCad battery, btw.

Most people don't have PTW's.

But still, even with an AEG, probably not a great idea for your battery's health to keep it connected to the gun while in storage.

mcguyver February 26th, 2009 21:59

Quote:

Originally Posted by Styrak (Post 928478)
Most people don't have PTW's.

But still, even with an AEG, probably not a great idea for your battery's health to keep it connected to the gun while in storage.

You're right. But there's alot of FET systems being installed in guns these days, and you can bet your ass there will be more of them in the future, from factory on up.

Just a good practice to get into.

Kuro_Neko February 26th, 2009 22:05

A bit off topic, but since we're talking about things to do and not do when storing a gun. You should always fire a couple of shots in semi before storing a gun, just to make sure the spring is all the way released. Firing in full auto can leave the spring half or nearly fully compressed. If stored that way it will damage the spring and result in lessened fps.

Kuro_Neko

Metninja February 26th, 2009 23:14

Quote:

Originally Posted by Kuro_Neko (Post 928494)
A bit off topic, but since we're talking about things to do and not do when storing a gun. You should always fire a couple of shots in semi before storing a gun, just to make sure the spring is all the way released. Firing in full auto can leave the spring half or nearly fully compressed. If stored that way it will damage the spring and result in lessened fps.

Kuro_Neko

Wow, never thought of that. Much appreciated man.

incrediboy729 February 27th, 2009 00:32

Quote:

Originally Posted by Kuro_Neko (Post 928494)
A bit off topic, but since we're talking about things to do and not do when storing a gun. You should always fire a couple of shots in semi before storing a gun, just to make sure the spring is all the way released. Firing in full auto can leave the spring half or nearly fully compressed. If stored that way it will damage the spring and result in lessened fps.

Kuro_Neko

Yup that's good advice for a newbs. That would really suck to have saved up your money only to have a newb rip his gun apart to replace an over-settled spring. Hehe.....ever had to open up a fully cocked mechbox?
Thanks for you myth-busting help guys!


All times are GMT -4. The time now is 18:41.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.