need help with mosquito mold BB shower
 

I was trying to fill up my mosquito mold bb shower grenade with gas and i heard a pop and noticed a rattle in the shell. I took it apart and found 8 little SS bearings in the grenade.
this version only has a spring that goes in to the "buttom".
My question is how the heck do i get the bearings back in the holes to hold down the button.
Any one else have this problem, Any help would be nice.

can u post some pics, been a while since I handled one of these

I think you had to twist off the main chamber and push the button part way to fill the bearings in

You need a grenade repair kit, or need to use grease to hold the ball bearings in the 4 holes while you stuff the assembly into the lower grenade section.

Thanks guys ill give it a try with grease. holding down the button was all i figured out!! I was ready to pull out whats left of my hair, And im bald

Just don't loose any of the BBs, so work over a controlled area.

Simply get them back in in pairs, after a little practice it becomes easy.