AK Metal Body Installation
 

Hey guys:

for the element AK metal body, I noticed that that back (where the stock attaches) looks a bit different from the stock plastic body. It only has 2 tangs on the sides that connect to the stock. It doesn't have the tangs on the top and bottem where the stock screws go through.

How do I install this metal body on a kraken?

Thanks!

Look closer at the stock plastic body. They are the same, stock, and Element ones.

Hint - Most Krakens have clear plastic bodies. Thus anything that's not clear colored can be removed and installed onto another one ;)

Disassemble as per this video:

http://www.mechbox.com/site/ak-47-up...bly-video.html

Reassemble as per this video, only using your metal body instead.

http://www.mechbox.com/site/ak-47-up...bly-video.html