Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Guns Discussion (https://airsoftcanada.com/forumdisplay.php?f=53)
-   -   KJW Glock 32C (https://airsoftcanada.com/showthread.php?t=31276)

underground November 20th, 2006 18:09

KJW Glock 32C
 
I can't decide whether to stick with the KSC Glock 19 with metal slide/barrel or with a KJW Glock 32C which already has a built in metal slide/barrel. I have found very little reviews on the net about the 32c which is why I'm very skeptical. Seeing this is my first GBB, I want to make a good choice. However, the only problem I know about the 32c is that bbs tend to roll out of the barrel when the gun is pointed down. I was wondering if that still happens now with the later generations or if there are major comparisons between the 19 and 32c.

-Rubix- November 20th, 2006 18:35

I have a newer gen (no trades) KJ G32c, and I have never had the problem described, or any others. Actually, the gun has performed very well within the 11 months I've had it.

Manaconda November 20th, 2006 18:56

let me give you a hint. Don't go with KJW! You'll be happier with TM or on of the other high quality brands. Save then spend.

Rumpel Felt November 20th, 2006 19:30

Uh, wha?

TM is a rip off compared to most KJW guns. There's nothing wrong with either but you get way more for your money with a KJW. They are especially good for starters.

Only buy a plastic gun if you have a specific higher quality metal body you intend to buy. Of course, you need usually double the money.

gallantcorey November 20th, 2006 19:43

I own a KJW P14 and I have had nothing but problems with my mags. Now with my KSC G19 I have never had a problem what so ever.

underground November 20th, 2006 20:45

Quote:

Originally Posted by gallantcorey (Post 384164)
I own a KJW P14 and I have had nothing but problems with my mags. Now with my KSC G19 I have never had a problem what so ever.

oh it has nothing to do with the mags, this is what the review said

"It seems that the rubber inside the breach is not tight enough to hold the BB in place, and once in a while, the BB in the chamber will roll out when you point the barrel down, and leaving the chamber empty."
(http://www.arniesairsoft.co.uk/revie.../cat/17/page/1)

Kid November 20th, 2006 21:18

Quote:

Originally Posted by underground (Post 384193)
oh it has nothing to do with the mags, this is what the review said

"It seems that the rubber inside the breach is not tight enough to hold the BB in place, and once in a while, the BB in the chamber will roll out when you point the barrel down, and leaving the chamber empty."
(http://www.arniesairsoft.co.uk/revie.../cat/17/page/1)

Double tap.

But really, there is normally not a problem with this, at least, I have not experienced that. Only problem I ever had was a freak break in the trigger mechanism that I had to order a replacement piece for. It cost me about $10 for two, just in case.

I would suggest that if the BBs roll out, you increase the hopup. Again though, I have never experienced this problem.

Try not to speak too much about a gun you've never owned.

underground November 20th, 2006 22:00

sorry, I misread gallantcorey's comment and thought he said the magazine was the cause of the problem.


All times are GMT -4. The time now is 01:51.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.