Vltor style stock anyone?
 

So i just ordered this from uncompany. It's the exact one shown here with battery! Does anyone on the forums have one of these with a battery inside and tryed it? Also wanted to know for any heads up before i install it. I would appreciate any help :salute:
http://www.uncompany.com/images/fa-stock-m4-set_big.jpg

i havent seen anyone in canada with one personally, but I know its the big rage on arnies airsoft. Try asking there.

let us know how it goes.

I just checked UNC, you're fine it will work. The stock is made to look like the VLTOR with the large panels to fit Lithium batt. in there.

It doesn't come with the small panels.

Best of luck, maybe you should do a review once you used a few times.

Thanks! Yup i cant wait to receive this and get it installed on my m15a4 cqb. I also purchased a QD silencer to kind of go with the stock so i will definatly write a review once i try it out a few times!

Yeah got one out here, we found that it did not slide cleanly due to the way the battery was confiqured, we ended up rewiring it so the short run (2 batts) had the connector comming off of it, and the 2 longer ones went in the sites instead of 1 long 1 short. What was happening was the wires were bunching up and due to the longer battery on the origional confiquration was mashing against them and not allowing the stock to slide to the shortest position. Works much nicer now that that battery is reconfiqed.

Interesting, was this the battery that came with the stock or a different type.? Im wondering if ill run into the same problem with the battery that comes with the stock...hmm

Exactely as shown in your picture. And we put it on a TM SR-16.

Oh and watch your tabs, they like to snap off over time.

Alright, will do! thanks