AEG upgrade advice/suggestions
 

So I'm fairly new to airsoft, I'm currently ordering a King Arms b.r.o spec15. I wanted to change the motor to the matrix Godzilla high torque but I'm worried that because the gun has a MOSFET out of the box. Will I have to rewire the MOSFET in order to replace motor or can I just swap it out with no issues?

Don't have hands on experience with that exact model.
Motor should just be a drop in part like any other m4.

What is your goal with a high torque motor? As you may be able to achieve comparable results with an 11.1v lipo.


Sent from my SM-G900W8 using Tapatalk

Get a SHS HT motor.

motors just have 2 leads on them, there's no reason you should have to rewire a mosfet to change a motor.
And if you're going to upgrade a motor, I recommend you buy a motor from a reputable company like ASG or Tienly.

Just wanted better trigger response, I was going to put an 11.1 lipo in as well, thanks a ton