Motor VS Battery
 

I recently made a huge mistake,I paired a Tienely 45k,13:1 gears and a 11.1 Lipo 20C.After a piece of humble pie I was told to drop the RPM,S to 25k. I put in 30K and it worked perfect (it has recently fractured the gearbox,shreaded the piston and so on).I just purchased a Ares vz58L and want to change the stock motor for a higher torque motor.
I was wandering if I put in a Lonex A2 Torque motor with 18:1 gears and a M130 spring can I still use my 11.1 Lipo with 20C?

Thx in advance

Use a 22k or 30k motor.
20c 1200mah is not much amperage.
If you have a mosfet throwing low voltage alarms while the battery is.over 10.5v, its because you dont have a high enough c rating.

Thank you for the advice.