KSC G19HW slide stuck... help.
 

I just got and i think i already broke it Embarassed .
I took the slide off, and while putting it back on noticed the hammer was in the way. I pushed it down while pulling the slide back. It (slide) got stuck with about 3 cm of the outer barrel visible.
I hit the back of the gun on my desk a couple times, now it is about 1cm of the normal position. Slide is not moving at all...
Help.

Fixed with the help of Glock_18.
Thanks!

To everyone who has this problem. Leave the slide in the middle position (so the recoil spring rod is sticking out), pull down slide release thingy (above the thumb), pull the recoil spring rod with a pair of plyers out while holding down slide release thigns (this time the ones on both sides of the gun).