Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   WA Hop-Up adjustment? (https://airsoftcanada.com/showthread.php?t=17797)

HGI November 10th, 2005 18:04

WA Hop-Up adjustment?
 
Alright to be honest WA guns are great but wow they're differnt (lots of parts in them lol). Thanks to Primus I was able figgure out the mag issuse I had.

Now to figgure out how to adjust the Hop-Up.

I have this gun:Western Arms S.C.W./ Wilson GILDED V12
http://www.wgcshop.com/WGC_Shop/imag...ps_cwr_low.jpg


I can get the gun appart but cant see a way of getting the inner barrel out of the outter barrel or to adjust the hopup.

Anyhelp would be sweet.



Also If anyone would know what the vaule of this gun might be?

Thanks.

HGI November 10th, 2005 19:01

Alright I figgured out how to get the inner barrel out but still dont see a way of adjusting the hop up.

Primus November 10th, 2005 19:09

To adjust the hopup you will need to take the slide off then when you look at the underside of it (the slide) you will see a hole when you can insert an allen key. It's basically in that little block behind the recoil spring guide.

As for the value if it's in good shape, I'd say mid to high 300 dollars but not 100% sure on that one.

p.phresh November 10th, 2005 19:16

I've owned both SCW 1911 and Magna 1911... i think the gilded V12 was only available in Magna blowback, if, in that case refer to this diagram:
http://tech.airsoftcanada.com/WA/wa-Colt1911.jpg

you shouldn't need to take the inner barrel out of the outer barrel.
You just have to take the slide off the gun, and adjust the screw directly under the chamber, Part no.97.

Don't over tighten the screw, the female threads are made of plastic and can easily be stripped.

Hope that helps.

HGI November 10th, 2005 19:21

Rad sweet works thanks.

p.phresh November 10th, 2005 19:24

well, the gun is worth at least $350 in near mint condition but i sold mine for $300 shipped.
And to be quite honest, i regret selling it, and i plan to get another one in the future.

here's my old FS thread!
http://www.airsoftcanada.com/showthread.php?t=13032

did you buy the gun from Damien?

Primus November 10th, 2005 19:38

Quote:

Originally Posted by p.phresh

Don't over tighten the screw, the female threads are made of plastic and can easily be stripped.

Ohhh, good call! I totally forgot to mention that and I had it happen on my first WA too...

HGI November 10th, 2005 21:33

p.phresh dont remeber who I got this one from but I do think it came from Vancouver. I got it in a traid during the summer.

It's is great shape already had a guarder upgrade hammer sping and AI flow restrictor installed in it + 1 mag.


All times are GMT -4. The time now is 13:36.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.