Best v2 gearbox sheel
 

Need to replace my gearbox shell (G&G blowback syndrome)

So I'll go without blowback, want reability before cool factor.

I find some brand interesting.

which one I should buy :

Dropfire
Bravo
Guarder
Modify
Another one ?

Just get a stock VFC one. They're cheap and good enough.

Who selling them ?

Mach1 Has them, or you can order directly from VFC.

not sure if the vfc gearbox will fit in a G&G... on top of a g&g meant to have a toptech gearbox.

VFC won't fit in a G&G Toptech

Get the CM16 series G&G mechbox. It's insanely better than the toptech one.

the toptech gearboxes that have the pneumatic crap on top are also part of the bolt plate assembly on the ARs and mp5s I've worked on, so putting in a standard v2 will mean you can't have a charging handle or bolt cover/fake bolt in your ARs.

You can get the toptech gearbox and just disable the pneumatic portion. Upgrade your cylinder head and install a sorbo pad on the cylinder head. That will prevent the gearbox from from cracking off.

Can I use a non blowback charging handle ?

Someone gave me a Classic Army V2 gearbox shell from a Scar-l

this will fit (except for the charging handle)

This is good enough ?

I use it to 30C to -10C

Ok so Finally I'll fit a Lonex Shell, with near complete Lonex and Zci parts inside