Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   AEG Trigger MAKING LOUD CLICK!!! (https://airsoftcanada.com/showthread.php?t=172004)

_Whiskey_ May 5th, 2015 09:58

AEG Trigger MAKING LOUD CLICK!!!
 
2 Attachment(s)
okay one of my m16's stripped a piston the other day, now no big deal opened it up replaced the piston no problem however once I got it back together the trigger in semi automatic makes a very loud Click almost sounding like something is breaking or not lined up properly. it only does this in semi, not in auto, auto the trigger is a smooth pull and makes no noise during the pull.

It only makes the loud click during semi (on every pull of the trigger), I think it could be the cut off lever as it seems to be the only thing that makes sense to me.

Any information you guys can throw my way would be great.

*Gearbox pics attached*

EOD Steve May 5th, 2015 10:03

The click depends on the position of the cut-off lever relative to the trigger trolley.
Are you observing the click with the mechbox opened/un-cycled? Try setting the sector gear forward or back and/or cycling the gun.

_Whiskey_ May 5th, 2015 10:08

Thanks for the Info, The click happens when the gearbox is fully closed up, When open it doesn't seem to be present from what I have seen. I'll give that a shot tonight and see if that solves my problem.

ThunderCactus May 5th, 2015 14:10

sounds like you're just resting on the cutoff lever position and it's releasing the trolley

_Whiskey_ May 5th, 2015 14:40

Quote:

Originally Posted by ThunderCactus (Post 1945581)
sounds like you're just resting on the cutoff lever position and it's releasing the trolley

any recommendation on fixing the issue? Replacement cutoff lever?

ThunderCactus May 5th, 2015 15:56

turn the sector gear so it's not resting on the cutoff lever

_Whiskey_ May 6th, 2015 13:26

Now my trigger cannot be pulled in semi, Going to have to get down to the cut off lever and check that

Renegade) May 6th, 2015 15:56

Quote:

Originally Posted by _Whiskey_ (Post 1945724)
Now my trigger cannot be pulled in semi, Going to have to get down to the cut off lever and check that

Its a combination of your safety, selector plate, and cut off lever not meshing properly. Are these stock parts or a mix of different brands in the gearbox?

_Whiskey_ May 7th, 2015 12:37

those parts are all stock

SuperCriollo May 7th, 2015 13:51

It might be the wires interfering with the plastic bar (forgot the proper name) that stops the trigger on safe. Just make sure nothing is on its way before assembled.

Kos-Mos May 7th, 2015 21:55

Quote:

Originally Posted by SuperCriollo (Post 1945888)
It might be the wires interfering with the plastic bar (forgot the proper name) that stops the trigger on safe. Just make sure nothing is on its way before assembled.

That would be the mechanical safety lever.

Also, make sure it's the right way! The "arm" should be above the center line of the screw, not under.

Zfurlong May 8th, 2015 12:38

Is that click happening when you let off the trigger in semi after the shot is fired or is it happening as the shot is going off?


All times are GMT -4. The time now is 10:42.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.