BW 1911 R2 part
 

Here is the scoop. I hate it when customers bring me their stuff apart in bags! Let alone bins and expect me to put it back together because they don't know how to. Normally I can do it with out a problem. But once in a while I get something I have never taken apart before and expect to put it back together and have it work.
I got a Black Water BW1911 R2 in plastic bags the other day completely apart. :banghead:Now most pistols are kind of the same how ever I got this one all back together and have a piece left over in the bag. Which I have no clue where it goes. Any help would be great. BTW the pistol racks and shoots with the mag in and no BB's but as soon as I put BB's in then it will not push the bb into the chamber. I would assume it is because of the left over piece. Please see picture:

Maybe look at a kwc 1911, cause my googlefu is picking a kwc

Yea i tried that, but it either was not there or it is a little different.

That looks like it would fit on a BBU return spring.

If that is the case, which it very well could be. Why would it not feed bb's in to the chamber. Would there not be enough tension on the return spring to push the bb forward?

thankx

That looks like a detent pin, the pins that keep tension on the slide catch and thumb safety.

Detent pins are usually a mirror image of that.

Yep, more or less. Without a parts diagram for this particular gun, that's the closest guess for me. There's nothing else in a 1911 that resembles that bit he posted but a detent pin.

Yea that is the problem, I can't find any diagrams for this pistol at all.

maybe check to see if your detent pins are missing or not?