VFC barrel nut
 

hello, any tips on how to remove the VFC Barrel nut, i search the internet land and it seems that everyone is having trouble on removing them because they are really tight.
thanks in advance!

Airsoft Store Canada sells barrel but wrenches, that should be step one. It should come off with a proper amount of force

Hey, trying to change the rails on the vfc eh??

Well I did it on my other VFC quake since I wanted to change the outer barrel.

You need a good ol wrench, preferably metric, and if you look at the barrel nut, it has two groves or spaces/indentations... just place the wrench right on these and just turn it counter clock wise. This is a breeze if you put the upper on a vice.

Yea I showed my friend the nut he said that it won't fit the barrel nut wrench.




Yea changing my rail to nsr rail.
I'll try that, but don't have a vice so I'll ask my brother for help I guess.

You actually need a crow's foot wrench for the VFC barrel nut.
I'm assuming you're talking about the E-series?

Yea it's the e-series.
Ok thanks stealth for the info!

But would the adjustable wrench work?