Building a high trigger response setup
 

I want my A&K Masada to shoot the second I touch the trigger. My question is, should I use the Lonex A1 (Speed and torque) or the A2 (MOAR TORQUE!)
I'm using an 11.1 lipo and an active breaking mosfet with standard gears and an M110 spring

With that spring I would go with the with the speed motor.

You would need to have a mosfet that brings your AEG to an "open bolt" mode. Meaning that your spring should be compressed after every shot. I remember seeing this a few years back, but I don't think its still done. It can't be very good for the spring and internals.

If you want instant response from your trigger id suggest a dsg (dual sector gear) only problem is their kind of a bitch to install and shim correctly, and full auto will ramp up large (20-40rps) possibly more.

Look it up on youtube and you'll see what i mean

Install a GBB kit..... If it ever comes out

Precocking. My mosfet does that but with a weak spring it doesn't really work very well. But for that you would really want a torque motor..

polarstar? lol

10:1 gears SS 2-3 teeth, m140'ish spring, 11.1 big battery & high torque motor.

If you want to use stock gearing, short stroke & go up a spring or 2. It will quicken the response

this.