G26 Advanced
 

Okay i recieved my Glock 26 Advanced about an hour ago and wanted to see the insides so i pull down the slide release lever and the slide goes forward a little but wont go any further what am i doing wrong why wont it come off.
I also notice the front compensator or what ever it is moves forward and know it wont go back over the hop up thats pissing me off other wise i would put it back in place and just push the slide back in place and leave it alone.
any help would be apreciated.

Take out the magazine.

mag is out

Agh then I'm stumped :p. a Glock pro will be along shortly.

i have to go to work in an hour so i hope i can get help soon but if not then i will be back tommarow.

so you tryed to take off the slides? and it wont come off or i aint attaching ?

the slide will not come off and the compensator and outer barrel wont go back over the hop up i really just want to get the outer barrel back over the hopup

The hammer must be down in order for the slide to come off.

Okay i found the problem part 26A-8 is hitting part G26-30 I dont know how i am going to get these pieces over each other. Any help would be welcomed
I can not cock the gun either because the slide wont go back all the way because these parts wont move. :(
this manual is for a g26 so the numbers are different number G26-16 wont go back over part G26-30
manual http://tech.airsoftcanada.com/TM/g26-install-1.gif

How far off do you have the slide? In that picture you're indicating the outer barrel won't go over part of the recoil rod assembly, is that correct? If thats the case, you may want to try to pull the outer barrel upwards us much as you can, while trying to slide it back, there is always some play between the outer barrel and the slide. At the same time use a precission screwdriver to push the recoil rod down. That may work, assuming thats the problem.

Is the hammer decocked? If it is, thats what is stopping the slide from coming off.

fixed thank guys your all a great help :grin: