Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)
-   -   we hk416 upgrade (close bolt ) (https://airsoftcanada.com/showthread.php?t=147138)

jeanson October 31st, 2012 13:20

we hk416 upgrade (close bolt )
 
i recently bought a we hk416 close bolt. the n.p.a.s is already instal! but i dont have the tool for the adjustment!

the hop up was damage so i want a new one but found nothing for close bolt
ra-tech have one but when i look it its not the same....

what did you use on yours???

i have 4 leaking mag i think i will put some silicone to never had this again.... the
seal seam ok but same if i oil it it leak from another place?????? its why i would put silicone!

theres any other upgrade to do like 6.03 inner barrel?? upgrade to open bolt? but my n.p.a.s will not work with it....

if theres something eles i can do just tell me thanks!

jeanson

XZIVR October 31st, 2012 13:30

Buy the open bolt upgrade. It will come with a new hopup and so on anyway, and open bolt npas kits are cheap.

jeanson October 31st, 2012 15:14

but what will be different open vs close? ok you see the bb in the chamber??? what else?
i have to bought 6 kit for the close bolt mag....

SINN October 31st, 2012 15:44

it actually shoots straight :)

jeanson October 31st, 2012 20:07

Not mine the hop up was damage.... And i font have the tool to adjust the npas

Kos-Mos October 31st, 2012 20:25

Il veut dire que le gun est plus fiable et le hop-up fonctionne correctement avec le Open bolt.

100$ qui va regler tous tes problemes.

Il y a un thread qqpart ici avec des photos pour resceller les mags. Ne prends pas de silicone, c'est trop long a secher et le propane l'attaque. Gasket maker bleu au Canadian Tire.

Une fois les mags ok, mets-les a vendre. C'est plus rentable de racheter neuf (version 2, pas de fuite) que de convertir les mags closed-bolt.

jeanson October 31st, 2012 21:07

la 2e version sont pas identique sauf les bout qui feed?

jeanson October 31st, 2012 21:12

where should i buy the conversion open bolt in canada?? dont find it.....

XZIVR October 31st, 2012 21:26

Not sure if the barrel would be the right length but everything else would: http://www.airsoftparts.ca/store2/in...oducts_id=2185

Kos-Mos November 1st, 2012 17:59

Quote:

Originally Posted by XZIVR (Post 1720605)
Not sure if the barrel would be the right length but everything else would: http://www.airsoftparts.ca/store2/in...oducts_id=2185

No...

Apparently the 416 uses the tabbed version Double check before ordering.

La version 1 existe en closed et open bolt.

La version 1.5 c'est les short mags VN

La version 2 c'est des 30rnds qui sont fait comme les VN (3 gros morceaux, pas de seals sur la longueur.

jeanson November 1st, 2012 22:22

jai le seal sur la longeur!


All times are GMT -4. The time now is 02:50.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.