trademarks
 

I wanted to post a thread in the FAQ section..duh..but i want find the best method to white fill trades.

white crayon

Paint, liquid, white. The kind you'd use for scale models and shit. Apply with small brush, let dry 10 minutes, wipe off excess (i.e., everything that isn't the engraved portion) with thinner on a clean, non-porous rag.

trades
 

great..thanx..i had an oil crayon that is used to mark steel,tried it,let it dry and it all came off,i could try the little TESTORS model bottle,if i used crayon,would a matte clear coat "lock in " the white in the engraving?