Will These Work Together?
 

I recently purchased this:

King Arms Full Metal Colt M4A1

http://torontoairsoft.com/product.php?id_product=1425

and

A conversion kit for M4

http://torontoairsoft.com/product.php?id_product=165


Without thinking about it first.

Will those two products work together?

Regards,

DJ

you'll need a rail system to mount it too.


wait did you buy the conversion kit and now you want to put the PEQ on it?

Well, this is embarrassing..

I meant to link to this.. http://torontoairsoft.com/product.php?id_product=82

DBOYS M4 CQB Set /w Silencer

That's the conversion kit I purchased along with the King Arms Colt. I did a lot of research on the gun I want but failed miraculously researching the RIS and accessories.

lol, Ya should work no problem.

So, (to ease my mind). King Arms M4A1 will work with the dboy conversion kit? I'll probably have to buy a PEQ though eh?

You may have to do a little work in case the barrel does not fit in the upper. And from the looks of it you'll need a new inner barrel.

In otherwords, I should probably take it back? Is it worth time + money doing all of that?

PEQ ya or wire to the rear , not a 100% but I'm pretty sure that outer barrel should fit in fine and if not a little sandpaper will for sure do the trick, you don't need to replace the inner barrel now but you can always upgrade to a tightbore later if you feel the need

sure it is its all part of the sport, get to know your gun inside and out, make those parts work for your project.

Hell after every couple of games I tear mine down just so in know how every things going

man this is my first year in the sport so my word means nothing but these guns are not all that hard to work on just take your time become one with it and have fun.

rearwire it saves you weight on the front end of your gun

+1

I found these videos. I'm anxious to work on the gearbox incase i may break something or something may no back the way it was.

How to disassemble your airsoft aeg m4 - YouTube
How to rewire airsoft M4 to the rear By: Watchalewknat ( Links in Description) - YouTube
airsoft tutorial: all about version 2 gearboxes & it's disassembly - YouTube

Then give it to a gun doctor who knows what they're doing, it's worth it.

I've got my ka m4 going in tonight to be rear wired, he told me an evening at the most. Every m4 I have is rear wired to a crane stock, balances out the weight if I want and attachments on the front end.

Hey Dutch, I'm curious to know who you took it to and how much $?