Airsoft Canada - V3 Tappet Question

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)

- - V3 Tappet Question (https://airsoftcanada.com/showthread.php?t=128272)

iKliiu

August 1st, 2011 17:39

V3 Tappet Question

Can anyone measure the thickness of a V3 tappet plate? I need the dimensions for the part that pushes against the gearbox (right under the nozzle)

spaceman13

August 1st, 2011 18:09

From a stock cyma V3.
0.0996" thick.
0.495" wide.
0.670" high.
the half circular groove that the nozzle goes in is 0.220" deep.

All times are GMT -4. The time now is 19:31.