SV infinity issue
 

So below are pictures of the issue. The part I need I believe is this

http://www.wgcshop.com/wgc2008/main/...Item&view=info

Basically from what I see the screw in part just snapped in half as far as I know.

http://i27.photobucket.com/albums/c1...fx/hybrids.jpg
http://i27.photobucket.com/albums/c1...x/DSCN0627.jpg
http://i27.photobucket.com/albums/c1...x/DSCN0626.jpg
http://i27.photobucket.com/albums/c1...x/DSCN0625.jpg

So do I need the posted part? and if so, how do I separate the broken part from the current long barrel and black part below it? Thanks for your help!

A new chamber would fix it, as to unscrewing the broken bit in your outer barrel... maybe try to cut two notches it in and turn it out with a flathead screwdriver? or maybe just a new slide and barrel? any replacement chamber you get will be metal, and will increase wear on the stock plastic slide.

Okay. Would they still make the same outer barrel? I got the chamber and what not off now.

edit: while on top I would need a 6" slide and I seem to be finding a lot of the usual 5" ones. What 6" one would fit?

PROG4 makes alot of parts for the older WA's, here's one piece replacement barrel
http://www.prog4.com/db/product-show.asp?refno=AR1345

all the 6" slides I'm finding are out of stock, but they do (did) exist. Shooter's Design seemed to make all the one's I've found through googling. It'll take some searching, but you may be able to find one.

that is the sort of thing you need, but be aware it might need alot of fitting.. i'll see if i have a spare one back in england when i'm next ofer there.

this has happened when i attached a slightly-too-heavy silencer to my WA it's a known point of failiure :(



by any chance does anyone have a metal (or plastic) 3.9 inch slide for the old R system.

http://www.prog4.com/db/product-show.asp?refno=AR1626 is an example

desperate to know of anywhere that has them (pro4 is sold out and elite airsoft in the UK advertises them but sends 4.3 slides and bitches at anyone who doubts them)

sorry for the thread hijack :(