info mossberg 500
 

i just bought a acm mossberg 500 and i want to change the rear handle for a retractable stock with an handle.
is real shotgun parts fit on this airsoft version ?
if it is do you know where i can find one?

The realsteel stock will work fine. I would suggest Marstar, but their ATI gear is all out of stock. Why not go through ATI themselves... Also, check their International Dealers link for local shops.

thx murdoch for the help im gonna order an ati stock:P

I hope you write back here with your experience with ordering form them and how the stock worked out for you.

I threw on a realsteel stock adapter on mine, too. Required minor modding (one area was a few millimeters too thick to fit properly), and the depth of the screw holes in the receiver were too shallow, so I had to use several metal washers to get a tight fit. Otherwise it was pretty trouble-free.

Used a RS Tapco SAW-style M16 grip and a VLT0R buffer tube, along with a King Arms repro MOD stock.

http://tacticalmoose.com/pic/m500_1_cr.jpg


Trouble now is my fill valve blew out and even replacing it it's still leaking.

i receive today my ati stock .
its alomost fit on the first attemp but the receiver was too thick.
after a 5 minute dremel trick, the gun look good here the pics


http://img109.imageshack.us/img109/5879/sspx0087e.jpg

http://img269.imageshack.us/img269/7221/sspx0089b.jpg

thx for the help guys

Nice work, G.

thx dude and thx again for the help