![]() |
Free/Easy VSR-10/Clone Mod That Allows Up To Approx. 480 -500 FPS
This quick and easy modification will work for most bolt action guns, I'm sure.
The tools that you will need are very easy to get your hands on. 1. Flat Screwdriver 2. Allen Key [To fit the screws on the bottom of the gun ] 3. Electricians Tape [ Forgot to get a picture ] http://i196.photobucket.com/albums/a...s/100_4943.jpg First off, what you want to do is remove the stock from the barrell assembly by simply taking out the screws that are infront and behind the magazine well, using the allen wrench. http://i196.photobucket.com/albums/a...s/100_4939.jpg Your setup should now look something like this. http://i196.photobucket.com/albums/a...s/100_4927.jpg Then, what you want to do is look for a little switch. [ In the green circle ] http://i196.photobucket.com/albums/a...s/100_4929.jpg This is where the flat screwdriver comes in handy. What you do is take the screwdriver, and push down on the switch until it looks like its' fallen out. It might be very hard to push down, but just keep pushing and it will budge. It should look like this. [ In the green oval ] http://i196.photobucket.com/albums/a...s/100_4930.jpg You should now easily be able to slide the bolt of the gun right out. http://i196.photobucket.com/albums/a...s/100_4931.jpg Now, cut off a piece of electricians tape and cut it into roughly 1/4 of its' height. Then wrap it around the very tip of the cylinder, called the cylinder head. Do NOT cover the hole with the tape. http://i196.photobucket.com/albums/a...s/100_4932.jpg What this is doing is creating a tighter fit, so that air cannot pass through, I believe. Done like dinner. Now, you can reassemble the gun. But there is one tricky part. There will be a wedge in the way of the bolt, when you try to put it back in. Just, take the flat screwdriver and push the wedge down flat, so that the bolt can pass. You must slide the cylinder in, and push the wedge down simultaneously. http://i196.photobucket.com/albums/a...s/100_4935.jpg Don't forget to make sure that the cylinder is completely straight when going in, or it will hook on something, like mine does. http://i196.photobucket.com/albums/a...s/100_4936.jpg Now, just use the screwdriver to push the switch back up into the place that it first was. Again, this might be a little bit hard. http://i196.photobucket.com/albums/a...s/100_4937.jpg After all that, fit the bolt assembly back into the stock and put the screws in. Remember, long screw in the back, short screw in the front. http://i196.photobucket.com/albums/a...s/100_4941.jpg Et voila! You're done. Wasn't that easy? http://i196.photobucket.com/albums/a...s/100_4926.jpg WARNING: I cannot be held responsible for any injury that one might experience during this process. I cannot be held responsible for any problems with the gun that one might experience during this process. This is for entertainment purposes only. |
WARNING: it would be wise to find out the sniper rifle fps rules of your region or field before performing any fps modification
|
Quote:
And wow, just a lil tape mod and this thing will go 480-500fps? Have you chronographed it? |
are you sure about that fps reading....
Clones of the vsr specificly the jg bar-10 have a stronger spring than the stock TM vsr-10 That MAY have somthing to do with it, other than that....i dont believe you. I did a mod very close to that and the max i could get out if it was 450.... pm me with specifics im going for a max fps vsr and help would be nice. -alex |
Hmm apparantely this was done to my BA i just received, I will chrony it on tuesday at the local game, for now, pop can test.
|
1. My JG BAR-10 stock shoots 430fps w/ a PDI 500mm inner barrel.
2. Attempted this mod, however it appears newer BAR-10's have a thicker nozzle, it sits so flush w/ the hop rubber that if you wrap anything (even teflon tape) around it, the tape will just get pushed off when you insert the cylinder. |
This is probably my first actual post, so you guys know.
By the way, I do not have real proof that this will up you to around 480 or 500 if you're lucky. I'm going with the word of others that have tried it, to get that out of the way. All I know is that my gun does shoot alot faster than it did before I did this mod. |
it just creates an air lock, its like running your engine without and then with piston rings!! Its the same reason why my pro win and the PTWs shoot better then most is because their is far less waisted energy.
|
Quote:
|
Two comments:
1.) This mod will on just about any gun where bucking to nozzle seal is loose. However, don't expect it to last since we're just talking about electrical tape. Top check the seal on your hop up for the VSR take the upper assembly out of the stock then cock the rifle with no magazine. Fire in a safe direction to ensure the chamber is empty. Cock again and place your finger over the end of the inner barrel to seal the whole barrel assembly. Pull the trigger. If your seal is good you'll hear a slow hiss as air escapes from various places. If your seal is poor then the gun will fire quickly as is normal. Quote:
|
Quote:
|
Jebus Blist this mod is so old it's not even funny... just google search "bar 10 teflon mod" and you'll find plenty of other threads on it on various websites.
|
Quote:
From what I've seen. |
Quote:
there are lot on the net how to do this, if I understood, then everyone else should have understood. making something much easier to understand is only making lower IQ idiots increase their FPS. And you really don't want idiots with 500FPS guns do you? |
Some stock VSR-10s already shooting 490fps which is over our field limits, and electrical tape is a stupid idea, use teflon tape as the mod says you should.
|
Lol, wow Sklad.
I didn't think about that. It's because I shouldn't have to. Quote:
|
Jesus you guys. Negative, negative, negative. It's all I ever see on this website. But that's okay, say what you want.
I haven't seen a "Nice thread, Gunner" Not one. =) |
Quote:
|
Quote:
What is a decent thread, anyway? Do you have criteria, perhaps? |
Quote:
you happy now? and +1 to ndas didnt you say you were leaving? |
Quote:
Man, you're such a negative and mean sorta brute. ...I knew there was a reason I like you. :D |
Quote:
Just hot Internet-shit. =D And yes, Bowers. I am. So you know, it's not like your words are going to make me stop owning an airsoft gun, if that's what is continuously bothering you. |
Quote:
|
Quote:
|
Yeah, it works. I don't have proof it gets to 480+. I'm going with the word of others that have done this to their gun. And, I'm not teaching them. If they want to mod their guns, that's fine with me. If they want to up their FPS, even if this mod didn't exist, they would anyways.
Am I correct? |
Plus, 500 is illegal. Anything under that is completely, totally, definitely fine. I'm definitely not at 500. I can't pass through the rim of the bottom of the popcan.
|
Quote:
air guns with both a high muzzle velocity (greater than 152.4 meters or 500 feet per second) and a high muzzle energy (greater than 5.7 joules or 4.2 foot-pounds). The “muzzle velocity” is the speed of a projectile at the instant it leaves the muzzle of a gun, normally expressed in metres per second or feet per second. The “muzzle energy” is the energy of a projectile at the instant it leaves the muzzle of a gun, expressed in joules or foot-pounds. Air guns need to meet both standards to be classified as firearms for purposes of the Firearms Act. 500 fps alone does not make it a firearm now i dont know how current that may be could somebody such as mcguyver comment? |
Well I have no way of measuring that.
There was a stinkbug in my room and I threw a cloth over it, grabbed my GBB and put it point blank to the cloth. (I had goggles on, door was shut) and I looked under the cloth after firing, the bug was like 1inch squared. It was crazy. |
=D
(Giving more material to flame me on, as we are running out of wood for this fire.) |
Not sure why your asking to be flamed, but if thats what you want then so be it....
Your gay.......with m700murder. |
what's with all these new underage kids with their VSR-10s? Maybe I should delete my review..
|
Quote:
|
Gunner, this is a forum, used for information, and the discussion of airsoft. Not a place for you to get some attention because you have nothing better to do.
I don't dislike you because you are young, its just because you act so stupidly, calling people things, and whining that you want to leave this "terrible" forum. The mods already have there hands full with enough crap going on, they don't need your help making things worse. So start acting like a decent person, or just leave. |
Quote:
1. I put up this instructional for entertainment/to learn from it not for attention, I don't care who any of you are, nor do I want to know. 2. You didn't have to say one fucking thing to me, you could've just let it go. 3. I act "stupidly" because you brought it upon me. Need I say more? Gimme' a break, seriously. Don't be hypocritical. It bugs me how you can continue to just pound me with stuff, yet, you hate how I reply. YOU ARE THE REASON. |
Aren't you 16 as well NDAS?
Why doesn't everybody hate you? That's weird, you're a respected user. Hmm.. Probably because you hide your age and birthdate in your profile. Good job. |
no, he's respected beacuse he respects others. He plays in the same area as I do and I see him almost every game I attend, and all the players in our area knows him as well.
You deserve no respect because you've never played, no one knows you, and all you know is to plink in the basement with a China clone 500FPS sniper rifle. |
Basement?
|
Quote:
|
Quote:
A-MEN BROTHA!!! |
Quote:
|
They let you join the fucking Fire Department?
Damn, they must be desperate. Pick on little kids, cool guy. It's summer, fight some forest fires or something. |
Quote:
also notice what i posted is a quote made by tokyoseven not myself also ***** |
Quote:
|
Quote:
|
BANANA
DONGS |
This thread is pathetic. The bickering that goes on here sometimes is just rediculous.
|
Quote:
1. I don't hide my age, you can't have it posted for everyone to see, they have to look at your profile you idiot. 2. I had a rough start here, trust me, not as bad as you, but I learned, and lurked on the forums and actauly went to some games. 3. I actually play airsoft, unlike you who plays around with your little buddies with clearsoft and magical tape powered 500 fps snipe rifles. 4. you want respect, yet you call members on the forum gooch goblers, and whine "oh im a little baby who wants to leave the forum, nobody likes me except m700 who has a man crush on me". 5. So I'm the reason you act stupid? Thats a shame, you should tell you parents to return the sniper rifle they bought you and buy you a brain for your birthday so you can think for yourself. 6. YOUR OPINION MEANS NOTHING |
Play nice children, dont make me get the hose out.
|
Quote:
|
A tank full of dooky water.
|
..for some reason that doesent surprise me at all
|
I'd rather get hosed by 14 month old blue cheese dressing and then kicked in the junk then listen to one more word from captain asshat.
|
Quote:
who knows maybe gunner will keep his word someday and just leave like he said he would if you want to help increase the odds it has been said that eating soup helps |
I sure as hell hope so... and maybe, just maybe if we all wish as hard as we can, m700 and gunner will run off to clearsoft land together where they can shoot each other with there shiney tsd sniper rifles.
|
Quote:
Anyone else with issues with him I suggest you do the same. To the original poster gunner552, thank you for your post of the tape mod, even though its a well known tid bit of info, your post was done with good intent. Take what youve seen here today and keep it in mind for future reference. Youve got the chance to be one of the few respected underagers that are apart of this community. As for M700murder, keep your nose clean less you want another time out. The next one will most likely me longer than the last. |
Quote:
Nothing to see here people. |
Quote:
|
Quote:
It's ridiculous how you continually fucking keep coming back to see whether I've responded on my own fucking thread. Now, I have the right to come back and respond, because, well.. It's my fuckin' thread. You, could stop being such a fucking retard, and you could get your head outta' your ass, into the real world, and think, "Hey, I don't have to talk to this guy." Fuck. Off. Thanks<3 I got something for you. http://i196.photobucket.com/albums/a...atdickndas.jpg |
|
Quote:
REALLY?! HOOOOLY SHITTTTT! You're KIDDING!!!! [Fuckin'. Duh.] |
Well, this thread was good until after the first page.
|
Not my fault.
|
well im gunna stop with the flaming and have some real airsoft fun.
woohoo big mil sim this weekend shrapnel are u coming |
Too bad he ignored me; I wanted him to see the little picture I took for him.
|
That was one curvy wang.
|
Quote:
|
Yeah, walking riiiiiight out of this one.
|
Holy shit guys. It's like two high school kids arguing... oh wait, your both still in high school. Be the bigger person and just drop it. This is why minors are looked down on here. Prove to us that you are mature enough to be here.
Gunner, good job with the write up. Step by step mods with pictures are always helpful. Maybe edit your post to just state the facts. If you don't know the FPS increase from this mod, find it out or don't list one. Maybe the mods could clean this thread up so it still remains useful. |
I don't need to respond, hopefully he's gets banned. I don't need to prove myself to him, his childish "ass poo dick" comments don't get to me. I don't think he realizes he is in the same province as me, and that I'll make sure the local clubs are notified of him. Good luck Gunner.
Quote:
*Edit* Sorry ASC/Mods for having to see all this shit, I'm not the "bickering" type. He just pisses me off. |
Quote:
They say evil triumphs when good men do nothing, it seems like idiocy/asshatery triumphs when longtime users chime in to support obvious trolls... |
NDAS not the bickering type?
LOL All you do is start it. You started shit on both of my fuckin' threads. You are the reason I piss you off. You could've just fucked off, you know that? You could have just fuckin' left me be. But being NDAS, gotta' be cool, right? |
uh-oh. panties in a knot
|
Don't fucking start Demco.
Don't think you're the first to flame me, prick. Look at these 4 pages before this. All hatred towards me, WOO! |
gunner dude... you kick ass!!!
|
i think this has gone on long enough, any mod/admin here to lock down this thread?
|
Quote:
|
Ooh, internet butthurt... One more reason for ASC to go age verified all over.
Gunner: lulz at your lame attempts at e-thugness. m700: Stop fellating gunner Everyone else: free candy in the classifieds, come quick! |
Quote:
As a "longtime user," I've seen tons of people who started out the same way as these guys and changed their behavior to become respected (well maybe not respected) members. It seems people are too quick to judge and are to stubborn to change their views. I could be wrong about some people but at least give them a chance to change. Anyways I'm not responding anymore in this thread. No need to be caught up in this stupidity. |
|
Quote:
Says fucking you, Posting the big picture of some bitch on your post. Fuck you. You are an inconsiderate, immature, fucking hypocrite. Fuck off. |
This is rediculous. Thread reported.
|
Do as you wish, I've been reported many times this week but the mods are too busy dicking around with BB guns. PEWPEW-PEWPEW I GOT ONE!
They don't care about the threads. Fuckin' gimme a break. |
Hmm. Whered the next three pages go?
Do the mods ACTUALLY LISTEN? : o : O : O : 0 : o : O : o : 0 : O |
Yea, they care. I'll be surprised if you don't get a ban after this.
|
Trust me, I probably will get banned.
But it gives me an excuse not to come to this god awful website. NDAS and other faggots like him are hypocritical, and fuck it up. I was contributing, putting up an instructional on a quick and easy mod. If people didn't know how to do it, they could use it as a reference. But it couldn't all be happy-happy joy-joy. Mother fuckers always thinking negative, and always thinking down on minors. So they start to tell me how its' stupid and all this other bullshit. So what do I do? I defend myself, I don't agree and take it in, because I don't agree. I refuse to agree, with something I don't believe in. Minors should be allowed airsoft guns. If they fuck up physically, take it away. Ban them until they're 18. It should be based on maturity, but nobody has the time or money to set up a program studying every kid in Canada, so they best they do is ban it from all the little children. The government is fucking stereotypical, and needs to take more shit into consideration. Christ almighty. And if you're over 25 and still airsoft. Go get a girlfriend and stop jacking off to airsoft magazines. At 25, shouldn't you be starting a career? Saving for a future home? Not a fucking $2000 AEG? Fuck. |
Quote:
hahaha you can really tell he's in high school shouldt you be studying so that your not 25 and in the 9th grade? |
Yeah, cause I study during summer, retard.
*11 |
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
It's immature little pipsqueeks like you that reinforce the need for the 18+ rule. |
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
The interesting = The crazy 30+ year olds who still play. They just need friends. Quote:
2. The 18+ rule isn't enforced using this website, so, there ya' go. 3. Immature Pipsqueek - Again for fucks sakes, you don't know me, yata yata yata. Don't forget to write this on your resume, see what the boss thinks: " I'm 22, I boat, I fly planes, I'm outgoing, educated, I spend all my money of toy guns, I play in the forest with a bunch of ugly high-school drop-outs who have nothing better to do besides that & sit at home on ASC coming up with reasons to hate Gunner." When do I start? |
Holy shit..
I've FINALLY had enough. Later ASC! PS: Feast on attention now, all you like. Make yourself look like a big tough funny guy ; I'm totally gone! :D |
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
Quote:
|
Quote:
|
Quote:
|
OK so this got way out of hand...
Popcan test from 3 ft (according to redwolf, i know the popcans arent the same thickness.) .25g (all i have)BB goes through both sides easily. If this thread is still open tomorrow I will post actual Chrony results |
Chronied today, 404-408 FPS with .25's with some slight hopup.
|
my....a violent little group here....
At any rate, (first post) hello all! I'm moving to Canada in a few weeks, Quebec, to be more specific. I figured I might as well work out where and who plays airsoft up there. Didn't mean to threadjack, PM me, I guess.... |
woah, why did you choose this thread to put your first post in. also welcome to ASC, I suggest you read the FAQ as soon as possible and lear all that you can from it. dont be afraid to necropost, if it is relivant to the topic than people probably wont mind answering your questions.
|
All times are GMT -4. The time now is 03:52. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.