RIS/Reciever gap. What can be done?
 

I have a shakey RIS. Bought used, should've seen it coming. Anyways i think i can help if i can get a rail riser or cover to span the gap between the upper reciever and the top rail of the RIS. Any suggestions?

There's a type of rail that joins the RIS and the receiver rail together, called a Nitro rail. Search for NV-SMB-RS16GR on www.wgcshop.com.

Other than that, if the RIS and receiver are the same height you could probably get away with a 20mm riser rail, the Nitro would be far more secure though.

any more direct links? cant find it. ..

WGC doesn't allow direct links from what I can tell, so that's about as precise as it gets. If you search that exact part number it should pop up.

You're a gimp =P
http://www.wgcshop.com/pcart/shopper...=NV-SMB-RS16GR

ohhhh, itll make it look like a S system! I have a CQBR though, will it fir, or can i modify it to fit?

I just have the top rail cover on my SR-16 part way back so it ties in with the top reciever rail. I never had the wobble issue to begin with, this is just to prevent it.

Aaack, I just figured out the direct link.

*freely admits to gimp status*

do these things lock into the rail like a scope, or do they just slide over. As for red ghost, is yours this nitro rail or just a plane jane rail cover?

also in a pinch you can use the carrying handle. :)

i dont have it anymore, that and i dont like the look of it being too much toward the front. im looking at buying this, but i dont liek waiting a month and half for stuff. http://cgi.ebay.com/King-Arms-Flatto...QQcmdZViewItem

I'm just using the rail covers that came with the gun. Nothing fancy at all. It's just that the top one has been slid back to cover a small portion of the receiver rail. It looks a little off, but beauty in function.

nice work, what kind of sight is that?

that wont be a month and ahalf... try 7 days tops.

its from china! Wont it take forever?

It's the Cambodian Tire El-crapo Crosman sight. But it works beautifully for $21.99. It took a few washers and some longer screws to mount it to the 20mm RIS-type rail as opposed to the 3/8" dovetail it's made for. And yes, I had to paint over the crosman logo as it drove me insane, that being the small rectangle of a glossier black on the sight body. I also shaved down the On/Off switch [not visible, on opposite side] as things would brush up against it and turn on or off the sight on me.

noi orderfrom them all the time...so quik

It will if you ship it by surface mail (boat).

This thing kick butt. I bought one from Blastyman way back when I was into armalites and it is one solid upgrade. You cannot go wrong with this item.